How To Use
STEP BY STEP GUIDE
HOW TO USE YOUR LUMILIA LUX™ 2in1
- Shave the Treatment Area: Remove hair from the skin surface you plan to treat. Ensure your skin is clean and free from any products or self-tanner before use.
- Power On the Device: Plug in the power adapter and press and hold the power button for 3 seconds to turn on the device. Note: The device is not cordless.
- Select Mode: After the device powers on and the menu screen loads, it defaults to Hair Removal mode. To switch between Hair Removal and Skin Rejuvenation modes, press and hold both the auto/manual button (top button) and the power button (bottom button) simultaneously for 3 seconds. The screen will display HR (Hair Removal) or SR (Skin Rejuvenation) modes accordingly.
- Adjust Intensity for Hair Removal: Choose an intensity level between 1 and 8. It's recommended to start with levels 1-2 for your initial treatment and adjust based on your comfort. Always perform a patch test first and wait 30 minutes to ensure the intensity suits your skin tone.
- Skin Rejuvenation Mode Intensity: This mode operates at a single intensity level, which is level 1.
- Manual Flash Operation: Place the device flat against your skin and press the flash button (top button) to emit a flash. It's recommended to wear the provided safety glasses during operation.
- Manual Flash Operation: Place the device flat against your skin and press the flash button (top button) to emit a flash. It's recommended to wear the provided safety glasses during operation.
- Treatment Frequency: For optimal results, perform 2-3 treatments per week. Treat each specific skin area once or twice per session. After completing your treatment, press and hold the power button to turn off the device and allow it to power down safely.
For more detailed information and visual guidance, refer to info@lumiliaskonco.com
Note: Always consult the user manual and perform a patch test before starting your treatment regimen.
How to Switch Modes
- How do I switch between Manual and Automatic (Glide) modes?
Press and hold the flash button for 3 seconds. The device will switch to automatic flash mode. To return to manual mode, repeat this step.
- How do I switch between Hair Removal and Skin Rejuvenation modes?
Press and hold both the flash (top) button and the power (bottom) button simultaneously for 3 seconds. This will toggle between Hair Removal (HR) and Skin Rejuvenation (SR) modes.
Hair Removal Tips
You can use the device 2-3 times a week for the first 4-8 weeks. After that, only occasional touch-ups are needed.
For best results, flash each area twice per session. The device is safe for facial use, including the area above the lip and chin.
The full Brazilian area can be treated with the Lumilia Lux™.
Using the device shouldn’t hurt, but a warm, tingling sensation on the skin is completely normal.
Skin Rejuvenation Tips
You can use this mode 2-3 times a week. It's especially popular for facial treatments.
The Lumilia Lux™ works for most skin tones and hair colours. See the chart below for details.
The Lumilia Lux™ works for all skin tones, except the darkest. See the Skin & Hair Tone chart below to see if your skin type is a match.
The Lumilia Lux™ isn’t effective on hair that’s light blonde, grey, red, or white. Check out the hair colour chart below to help guide you.
Instructions for use
Check the skin tone chart and select the appropriate light intensity level. (We recommend starting at level 1 for first-time users.)
Shave the area of skin you're going to treat.
Plug in the device, then press and hold the ON/OFF button for 3-5 seconds to power it on.
Press the ON/OFF button to adjust the light intensity level.
Wear the goggles to protect your eyes from the flashes.
Hold the device at a 90-degree angle to your skin and press the flash button to begin treatment.
For hair removal, choose your desired light intensity level. Refer to the table below to select the appropriate setting.
